3 CORE FLAT CABLES FOR SUBMERSIBLE PUMP MOTORS
Tekmak 3 core Sumbmersible pump cables are manufactured with Electrolytic Grade bright annealed copper wires, insulated and sheathed with special grade branded PVC compounds. The Cables are flexible and conforming to IS: 694. The outher sheath PVC compound is specially compounded to have the additional properties, viz, maximum water resistance, resistance to alkaline and other chemicals found in soil, resistance to lubricants, oils grease etc., and good abrasion resistance
3 Core Flat Submersible Pump Cables - 1100Volts Grade
| Conductor Area |
Number of wires & Dia |
Insulation Thickness |
Shealth Thickness |
Outer Dimensions Width x Thickness |
Conductor Resistance at 20 deg.C |
Current Carrying capacity In air /Unclosed |
| Nominal |
Nominal |
Nominal |
Nominal |
Approx |
Maximum |
|
| Sq.mm |
No./mm |
mm |
mm |
mm |
ohm/km |
Amp |
| 1.5 |
22/0.3 |
0.6 |
0.9 |
11.0x5.0 |
12.1 |
16 |
| 2.5 |
36/0.3 |
0.7 |
1 |
13.0x6.0 |
7.41 |
22 |
| 4 |
56/0.3 |
0.8 |
1 |
15.3x6.7 |
4.95 |
29 |
| 6 |
84/0.3 |
1 |
1.2 |
18.6x7.9 |
3.3 |
37 |
| 10 |
104/0.3 |
1 |
1.4 |
23.5x9.8 |
1.91 |
51 |
| 16 |
126/.04 |
1 |
1.4 |
27.0x11.2 |
1.21 |
68 |
Specification : Insulation colours : Red, Yellow,& Blue Outer Sheath Colour ; Black
Cable selection chart for Guidance (3 Core Submersible Pump Motors) HP vs AMP @ 3 Pharse, 50Cycle, 440Volts
| BHP |
5 |
7.5 |
10 |
12.5 |
15 |
17.5 |
20 |
25 |
30 |
35 |
40 |
45 |
50 |
| AMP |
7.5 |
11 |
14 |
18 |
21 |
25 |
28 |
35 |
39 |
46 |
53 |
59 |
66 |
DATA FURNISHED BEING INDICATIVE ONLY, THE COMPANY HAS THE RIGHT TO AMEND, REVISE OR WITHDRAW THE SAME WITHOUT PRIOR INTIMATION THE COMPANY WILL NOT BE LIABLE FOR COMPENSATION OR DAMAGES DUE TO INCORRECT USE OF THE CABLES
